Manual - TEDDY Plus

What's Included:

When you receive your TEDDY Plus sofa, you will receive the following: 

  • 2 boxes with mattresses
  • 1 box with 1x1 meter base
  • 6 removable velcro pieces attached underneath the mattresses (2 pieces on each mattress/base)
  • 1 box with 2 corner cushions
  • 1 box with 1 straight cushion
  • 1 box with metal bars

Metal bars

Before assembling your sofa, you need to prepare the metal bars. The metal bar system is designed for easy assembly by simply screwing the small straight metal pipes onto the ends of the main metal bars. Once you’ve done this for all of them, the metal bars are ready to use. For the Teddy Plus, you will receive pipes in two different lengths. This also means that if you’ve accidentally screwed a pipe of the wrong length onto a metal bar, you can simply unscrew it and switch it with the correct one.


After assembly, fit the TEDDY Grips for anti-slip and floor protection. See our guide here on how it's done.


Assembly and place the metal bars as follows:

  • Small bars on each side (with one short leg on each bar)
  • 2 Large bars at the back
Image description not available

Note: The thread is not fixed to the metal pipes and can move between the large and small pipes when unscrewing them. However, this does not affect the function of the metal bars.

Image description not available

How to assemble the sofa

1.    Arrange the metal bars as described above in the area where you want to place your sofa.

2.    Place one mattress on top of the metal bars, then stack the second mattress on top. The mattresses are identical, so it doesn’t matter which one goes on top.


3.    Place the 1x1 base at the end of the two mattresses, and connect the mattresses and the base using the velcro pieces on both levels, like in the image. (Mattresses seen from below)

  • ‘Loop side’ of Velcro sewnonto the backside of the mattress fabric.
  • ‘Hook side’ movable Velcro pieces to connect mattresses.


5.    Adjust the metal bars so they fit snugly around the mattresses and base. The bars function similarly to bookends and can also be inserted under the sofa after stacking. However, if placing the sofa against a wall, it’s easier to position the metal bars first.


6.    Place the two corner cushions on each end, and the straight cushion in the middle. The corner cushions are identical, so it doesn’t matter which one goes on which end.


7.    Ta-da – your sofa is now ready!

Image description not available

From Sofa to Bed

To convert your sofa into a bed, simply slide the top mattress down and place it in front of the bottom mattress. To prevent the mattresses from sliding apart, you can connect them using the velcro pieces included with your sofa. Here’s how:

Image description not available

Protecting your floor
As with any piece of furniture, it is your responsibility to protect your floors. We do not cover any damage caused to flooring by our products. Therefore, we always recommend using felt pads under the metal bars — just as you would with other furniture.

If you have slippery floors or have placed your sofa on a smooth surface, the metal bars may slide a bit during use. To address this, we offer an anti-slip product called Teddy Grip, which can be ordered separately to help keep the bars securely in place.

As an added benefit, Teddy Grip also provides extra floor protection – a convenient two-in-one solution.

Please note: That the metal bars sliding a bit is a rare occurrence, but the solution is available if needed.

Maintenance
Want to keep your new sofa looking its best? Visit our maintenance page for all the tips you need: Maintenance and cleaning.

Product specifications
Mattresses: Cold foam

  • Foam Density: T30.
  • Foam Elasticity: ILD 45


Cushions: Silicone ball fiber in a black inner fabric sleeve

Metal bars: chrome-plated steel 

Fabric:

  • 90% polyester, 10% nylon
  • Martindale: 35,000
  • Color fastness to light: 4-5 


Certifications: All parts of the mattresses and cushions are Oeko-Tex certified, ensuring high standards of environmental friendliness and safety.

Claims

If you have experienced a fault or issue with your product, please submit your case through our Claims & Returns Portal.

When submitting a claim, we kindly ask that the reason for the claim is described as clearly as possible together with relevant photos of the products and labels on the boxes.

Once your form has been submitted, our team will review the case and get back to you within a few business days.

Before submitting a claim, we encourage you to visit our Maintenance & Cleaning page. Here, we’ve gathered care tips and guidance on cleaning, maintenance, and how your TEDDY naturally settles into its shape over time.

Please note:

  • Claims related to delivery, transport damage, or missing packages must be reported within 48 hours of delivery.
  • By signing the proof of delivery, you confirm that all packages were received and that they arrived in the expected condition.
Image description not available